Exploring Anti Aging Skin Care Products

There are thousands of anti aging skin care products on the market as you must be well aware of. However, the quality of these anti wrinkle skin products will vary from exceptionally lousy to outstanding. Not surprisingly, many of the companies will claim their special brand is the best there is.

Obviously not every product can be the best. That means there is a lot of misinformation about skin care out there. No wonder consumers looking for high quality anti aging skin care products often are unsure as to which specific product they should buy and use.

In general, products containing ingredients that have been proven effective by clinical tests can credibly be called good products. Let’s take a look at a few of these.

Any product containing ingredients that are 100 % natural would definitely be worth exploring. That’s because all natural anti aging skin care products typically avoid harmful or even toxic, which are still often used by even brand name companies that base their products on chemicals and mineral oil.

They will use preservatives and synthetic chemicals in order to make their creams have a nice texture, smell good or make it stay good for years on the supermarket’s shelf. While such properties are great for the company’s profits, they are unfortunately harmful to the people using these products: possibly causing skin irritation, rashes and even cancer.

But when you use all-natural products that are free of these potentially dangerous ingredients, you can avoid a lot of potential health hazards.

Of course, it is also important to do some research when on the lookout for the best anti aging skin care products. Such research could consist of reading user reviews, doing a little customer service research, or simply taking the good advice of a friend. Great products will eventually develop a reputation for being great – regardless of if they are widely advertised or not. When you find a product with a reputation like that, it is definitely worth trying out.

However, remember not to take all anti wrinkle cream reviews as the absolute truth, because different people have different opinions on what equals “good”, and what may work for someone else, may not be ideal for you.

My tip is to try out a few skincare product lines that are 100% natural and have good customer reviews. Try to find products containing a mix of natural substances designed not only to moisture, but also to boost your skin’s collagen production.

Some of the best all-natural ingredients include, but are not limited to, C-enzyme Q10, Xtend TK and Phytessence Wakame. These are all powerhouse ingredients proven to smooth out wrinkles and keep new ones away. Look for anti aging skin care products containing these three, and you should be seeing anti wrinkle effects in no time!

To learn more about anti wrinkle skin products and natural skin care, please visit my website today for founded, reliable information.

All You Need to Know About Production

The objective of any business firm is to maximize the difference between total revenue and total cost. This requires among other conditions that the firm purchases and combines factors inputs in such a way that the total cost of producing any particular level of output is the lowest possible figure, given existing technological and institutional conditions. The word production means manufacturing.

Production in the wide sense includes other activities that do not imply manufacturing of physical commodities. This is because the manufacturing of such commodities will be useless until they get to the consumers who need them for their satisfaction. This includes the process of getting goods manufactured to the final consumer such activities includes transportation, distribution and marketing. In addition , services which does not involve the “creating” of physical goods but which goes into adding to the satisfaction or utility of human beings are included in production and all these lead to the satisfaction of consumers and therefore, they are all part of production. A production process is the set of all activities that are required to convert a set of inputs (human resources, raw materials) into desired output such as finished products and services. Production therefore is the conversion or transformation of input into desire output.


There are major key aspects or let me say types of production namely: job production, batch production and flow production. It is possible that these keys speech of production are utilized in a factory at different stages of the production of a product. JOB PRODUCTION: is the manufacture of a single complete unit of a product by an operative or a group of operatives and a number of such products can be worked upon simultaneously by different groups of workers. Each group of workers will complete work on the unit before taking up another.

BATCH PRODUCTION: batch production requires that the work on any product is divided into parts or operations. And that each operation is completed through the individual units making up the batch before the next operation is under taken.

FLOW PRODUCTION: is the processing of the materials continuously and progressive. Thus, their is no idle time as in batch processing since work is complete on a unit at a stage of production, it is moved on to the next stage without waiting for the other Items in the batch. It is necessary each operation or manufacturing stage is of equal length, and there is no moment off the production line; inspection is located within the flow production line and the inspection function does not occupy more than the unit operation time, all stages are balance, the correct material, plant and equipment is provided on time and maintenance is by anticipation not default.


The goods in production can be classified in various ways, such classification includes: capital goods, consumer goods, durable goods and non-durable goods.

CAPITAL GOODS: these are goods needed for the production of some other goods such as machines, equipments.

CONSUMER GOODS: are those goods that are needed for the satisfaction of immediate wants, such as food stuffs.

DURABLE GOODS: these are goods that can last for a long period of time and can therefore be used as many time as possible such as furniture, electronics.

NON – DURABLE GOODS: these are goods which have shot life spam and can therefore be used probably only once or a few number of time such as raw materials generally.


Supposing the maximum amount of any production that a firm can produce with any given collection of factor input is determined by prevailing institutional circumstances and by the existing state of technical knowledge. The relationship between the inputs and the outputs is expressed symbolically by a production function of the general form Q=F(V1 V2 Vn) where the variables V1 V2. Vn represent quantities of various factor input and the variable Q represent the maximum output that the firm can produce with a giving set of the input variables. It is assumed that the effect of an increase in any of the input variable is at least up to some limit to increase output. It is also assumed that the proportions in which various factor inputs can be combined to produce a given quantity of output are normally variable. Cases of fixed proportions (at least among ingredients) are found in certain chemical processes; but otherwise, experience indicates that input proportions can be varied significantly with output at a constant level.


The essence of successful new product introduction of simplification may lie in the appropriate timing of the action. The characteristics of a generalizing product life cycle. The product life cycle is an important tool for analysis and planning of the market activity, it shows the trends in sales and profitability of a particular product over its life cycle. This life spam further has clearly separate stages just like the life of an individual human being.


There are four major stages in the production life cycle these are: introduction stage, growth stage, maturity stage and decline stage.

INTRODUCTION STAGE: this stage will be dominated by the need to establish the product in the market by building buyers and distributors’ awareness of the product and its benefit, consumer advertising and trade promotions will be important in this initial communication process.

GROWTH STAGE: once successfully established, the new product may begin to enjoy rapid sales growth which along with the lack of competition may make this the most profitable stage of the life cycle of the product. The growth stage should be managed so that a full demand base is built in market; there is selective building of customer demand at the expense of existing or substitute product types marketed by competitors.

MATURITY STAGE: it is essential to company profitability and cash flow that , the stage be prolonged for as long as possible for well established products and brands this should be a time for consolation in the market place is mainly concerned with market share, so critical marketing activities need to be managed. To maintain product distribution and customer access to the product, to maintain customer loyalty to the brand or product and hence the race of re- purchase.

DECLINE STAGE: ether for reasons of technical obsolescence, changes in customer or Trade attitudes towards the product over familiarity with it or the emergence of a better product elsewhere in the market; a stage may be reached when sales and profitability start a consistence and perhaps irreversible decline. Once management has recognized and accepted the inevitable, he should withdraw all expenditure on the product above its variables cost of production, and perhaps raising its price.


Production factors are the agents, inputs or resources used in the process of production. Without such factors, productions may not be possible. However, it is not production factors themselves that are of much importance but the services that such factors could render in production. These production factors includes: land, capital, entrepreneur and labour.

LAND: is the earth and all the natural resources found in and on it. Such resources includes: forest, rivers, minerals and even it includes such thing as sunlight. Land is the final source of all materials because any commodity can be ultimately traced back to the land. The reward of land is rent. The term land is used in the widest sense to include all kinds of natural (as distinct from man-made) resources.

CAPITAL: could be as all forms of wealth that are set aside for the production of further wealth. Thus, capital represents the collection of wealth that are not needed for immediate consumption. Capital is also described as a derived factor because capital has to be produced before being used to produce commodities.

ENTREPRENEUR: is a person who initiates, organizes, control and directs the process of production and bears the resulting risk in the production process. An entrepreneur is the business organizer and the one who combines other factors of production for maximum output. The shapes of the curves in this figure are based on a normal distribution. The actual shape of the curve and the length of duration of the four constituent stages will of course, varies for each production or brand.

Apply the 80/20 Rule and Watch Your Personal Productivity Soar

Before we can apply the 80/20 rule, we need a clear picture of what it actually is and a basic idea of where it originated.

In the early 1900’s, Italian economist Vilfredo Pareto observed that twenty percent of the people in Italy owned eighty percent of the wealth. Over 30 years later, Dr. Joseph M. Juran, who worked in the field of Quality Management in the United States, recognized a similar occurrence, namely, that many things in life are unevenly distributed.

He referred to this trend as Pareto’s 80/20 Principle, which is otherwise known as the 80/20 rule. Basically this means that a small percentage (roughly 20%) of the overall activity yields a larger percentage (roughly 80%) of the result.

Applying the 80/20 rule to your personal productivity will help you to prioritize your work from most important to least important and then to budget your time accordingly. To make prioritizing your tasks a bit easier, estimate the amount of time you will need to complete each task. You will be more productive if you focus on completing the most important tasks first and if you finish time-sensitive projects before tackling other tasks.

One survey revealed that while people spend 60 hours a week in their offices, they do less than 20 hours of actual work. Applying the 80/20 rule, using the aforementioned suggestions, could send the average office-worker soaring to employee of the month in no time flat!

With your priorities set and a definite plan in place as to what work you need to complete and the time-frame you have to complete it, you are well on your way to improved personal productivity. Again, the 80/20 rule suggests that in a small amount time you can be very productive. Therefore, beware of becoming side-tracked by non-essential intruders like procrastination.

Keep in mind the old adage, “why put off tomorrow what you can do today!” Also, be mindful that in the course of a day, unexpected things do come up and require our time. However, this is usually the exception and not the rule. If you really want your productivity to soar, stay focused on the goal of completing your tasks on-time!

Now that you know where you want to be, it’s a good time to ask yourself where you are now in relation to reaching your goal. Are you already in the 20% of efficient, productive workers, are you in the 80% of not-so-productive workers, or are you somewhere in-between?

What does your annual or quarterly review reveal about your personal productivity? What do your peer reviews show? Regardless of your current standing, take an honest look at the work you’ve done lately. You may not need a full overhaul of your work habits but instead you may just need to fine-tune a few areas.

Don’t hesitate. Why not start today? Apply the 80/20 rule at work and even at home and just watch your personal productivity soar!